shimian

cover

IMG_0551.JPEG

IMG_0552.JPEG

IMG_0553.JPEG

plate_1.png

2025-01-01_57d19b8556733.jpeg

All parts on single sheet using AMS. Remove pin hole supports from main model and insert back piece into model. No glue required, friction fit.

0.2mm layer, 2 walls, 15% infill, Top surface Ironing

IMG_0694.jpg

IMG_0695.jpg

This model is 70% the size of the original, and the thickness is a little less on top of that to make it lighter and faster to print.I also added brims to ensure the tips of the wing don&#39;t detach, and slowed the print speed for a smoother top layer.

70% size, 6mm thick, with brims & slower speed for top layer

plate_2.png

3D_EG

thumbnail_IMG_1934.jpg

Pause added for manual color change

Manual Color Change 0.2mm layer, 2 walls, 15% infill

andysmith_ca

IMG_1001.jpg

Screenshot 2025-03-06 at 5.35.42 PM.png

I wanted to make this print well on an A1 Mini without an AMS. The model is at 80% and I have changed the supports to tree supports and only where critical. This leaves the holes in the bottom nice and clear and removes the supports from the tabs on the bookmark piece tabs. I have printed 4 of these for my daughter and her friends and they worked great.&nbsp;Manual pause added for colour change of the top dragon.

A1 Mini - 0.2mm layer, 2 walls, 15% infill Limited Supports

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Dragon decoration Fourth Wing

I saw a stacked dragon being advertised online but determined to find my own. I found this model of Andarna and Tairn as separate parts, so I stacked them and added an insert for between two books with some easy to insert pins for no glue assembly. Squish between your two Fourth Wing books for a nice decoration. Printed using Sunlu Black PLA and Overture Gold PLA Silk.

Print Profile(4)

Description

Comment & Rating (134)

This remix is based on

License