Bent spout for Plastic Bottle, with funnel and cap

A bent spout for a soda/water bottle with a funnel to fill it and caps (your choice of a loose fit or a tight fit) to seal it. The design and profile provide a clean print of all parts in PLA, PETG or your choice of filament.

Great for:

• Silica desiccant, for storing dry desiccant and pouring it into desiccant containers like these: https://makerworld.com/en/models/786118 and https://makerworld.com/en/models/669118
• Bird seed, for decanting from bags/boxes and then filling bird feeders.
• Fertiliser (solid or liquid), for decanting from bags/bottles and mixing as needed.
• Other liquids or small solids (pellets, beads, seeds etc) that need to be poured.

Features:

• The bent spout and oval profile make it easier to do a clean pour of the contents.
• The cap seals the spout to protect the contents. There's a choice of a loose fit or a tight fit (ideal for printing in TPU but any filament is fine). The loose/tight fit is labelled inside the caps.
• The funnel is offset to help with stability of the bottle when filling.
• The funnel fits snugly over the end of the spout so that whatever you're filling it with doesn't pile up on the end of the spout (to prevent a mess when the funnel is removed).
• All parts print well with standard seams or with scarf seams (you may need to adjust scarf seam parameters for your particular filament).