Search models, users, collections, and posts
Angular logo
IP Report
Print Profile(1)
0.12mm layer, 2 walls, 15% infill
Designer
1.3 h
2 plates
Open in Bambu Studio
Boost
1
5
0
0
6
4
Released
Description
The model was created as a door sign for Angular's work department.
I printed the logo so that the base with the shield together and the letter separately. The letter is then inserted into the model, in my case it holds beautifully even without glue.
I also prepared stl files for people who would like to print each layer separately. Alternatively, I have also prepared a model that is complete for printers supporting multi-color printing.
I printed the model on 8% filling, from PLA material with dimensions of 10x10 cm. I think that even 5% filling would be completely sufficient for these dimensions, which is what I came up with during printing.
To create the model, only the svg Angular logo was used, which is freely available.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)