Audioengine A2+ Wedge

This is an angled wedge for the Audioengine A2+ speakers. It raises the front of the speaker up about an inch, pointed the speakers up off of your desk at a 6 degree incline, rather than straight out. 

I wanted something similar to products I had seen on Amazon, but at not such a harsh angle. 

I used the 0.16mm Optimal @BBL X1C profile with BBL PLA Basic filament, with the following modifications: 

• 30% infil (to make it feel a little more dense and well made). This isn't necessary, and takes a little longer and takes more filament, but will make the wedge feel more dense like the similar to the speakers

The .16mm layer height really makes a difference in the surface that the speaker sits on. Anything bigger will look weird. Similar to the 30% infil, not necessary because once the speaker is on the wedge, you won't see that surface. But if you are like me, I know it looks weird under the speaker, and it would have bugged me.