Overengineered kitchen towel holder / hanger / hook / handle for cabinets and doors by JayFai

JayFai

Household>Other House Models

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 15% infill

Designer

1.3 h

1 plate

4.6(14)

(Extra sticky - with Brim) - 0.2mm layer, 3 walls, 15% infill

Designer

1.5 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

156

195

141

Released

Description

Don't you hate it when your kitchen towel is wet and crumbled pushed through the handle of your cabinet?

Fear no more, i've got the perfect solution!

The kitchen cabinet handle bar holds your towels, frees your cabinet handle and takes care of a clean look as well.

Perfect for drying the towel!

Maybe this is the print that you need to convince your wife/husband/significant other that owning a 3D-Printer is necessary!

I also added a single hook: https://makerworld.com/de/models/96624

Instructions:

Just print the 3 parts, everything further needed is just a bit of 1.75mm filament left-overs and 1 minute to assemble it:

Put the parts together:
Stick the filament in the holes (For extra style-points use a different colour!)
cut the filament ends flush
place the towel hanger
happy wife - happy life

Please share your make! :)

Comment & Rating (30)

@Mitch23

Print Profile

0.2mm layer, 3 walls, 15% infill

I tired it two different times and the model came off during print. never had this issue with any other job.

The designer has replied

@JayFai

that’s odd, which plate do you use? I used the high temp plate with PLA. I added a new profile for the textured plate with brim, this should solve it, could you please report back? Adhesion is a neverending story in 3d-Printing, i clean my textured plate with 99.9% IPA between prints and every now and then i clean the whole plate with dawn dish soap and warm water. After drying it is like new again. :)

(Edited)

@Mitch23

Replying to @JayFai :

Bambu Textured PEI plate. I really wanted to like this, I tried twice, as you can see. I figured it might just be a fluke as I have not had any issues with previous prints.

@JayFai

Replying to @Mitch23 :

thanks for the reply, I added the second profile with added brim for you to try, but I recommend the hot plate for that :)

@Checkso

Print Profile

0.2mm layer, 3 walls, 15% infill

Looks great!

The designer has replied

@JayFai

Thanks for sharing! Glad it helps you, too! :)

@user_2040189551

Print Profile

0.2mm layer, 3 walls, 15% infill

A perfect print. Done in abs

The designer has replied

@JayFai

thanks for sharing! glad it helps you as well :)

@user_1896108163

Print Profile

0.2mm layer, 3 walls, 15% infill

nice print🙏🏿

(Edited)

@ontheriver

Print Profile

0.2mm layer, 3 walls, 15% infill

It does force my cabinet door to sit open slightly, but perfect print, so nice to have the towel hanging flat.

The designer has replied

@JayFai

thanks for commenting! not sure what cabinet you have, but mine is adjustable at the hinges, maybe also a solution for you?

@ontheriver

Replying to @JayFai :

That's a great suggestion, don't know whyI hadn't thought about it - probably because it didn't bother me enough. Thanks for the nice functional design.

@sokvichet

Boosted

I've made 5 of these. One for my wife, and the rest for family who see it and want one. Lots of trouble with the arms UNTIL adding a brim and printing separately. With a brim, it prints perfectly.

The designer has replied

@JayFai

haha, glad you like it! yes, the arms are a real pain if you struggle with first layer adhesion, I always use 3D-Lac for those demanding parts after cleaning with IPA. if you like you can upload your print profile with brim for others?! :)

@jadeirving

A1 mini version?

The designer has replied

@JayFai

that will be a little bit shorter due to the smaller build plate Volume, but I can give it a try! in the meantime you could try to print my other overengineered Kitchen Hook! :)