A1 Side Storage - Free 3D Print Model

Search models, users, collections, and posts

Basti0o0

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.24mm layer, 2 walls, 8% infill

Designer

7.2 h

2 plates

4.3(28)

Open in Bambu Studio

Boost

284

757

589

275

Released

Description

The profile has a layer height of 0.24 mm and an infill of 8%, which enables fast printing.

The model needs very few supports and is put together by pins.

Boost Me (for free)

If you like my model support me with a free boost. Thanks! ❤️

Comment & Rating (35)

@user_1705732410

Print Profile

0.24mm layer, 2 walls, 8% infill

Easy fast print

@SnowBolion_II

“fast”💀

(Edited)

@user_1705732410

I routinely have 20 hour prints

(Edited)

@DyaSinon

The box is very tight and doesn't slide If you put on the lid it no longer fits on the side, it starts to generate force against the screen arm of the Bambu A1 Too bad, it looked very nice and functional But I don't think it can be used for this purpose I will have to use the printed parts for something else

Show original

@tzareba

Print Profile

0.24mm layer, 2 walls, 8% infill

@naruto.uzumaly

The print profile is no longer public

The box is unsuitable for the drawers, it does not fit correctly and has damaged the top of the box

Show original

@naruto.uzumaly

Print Profile

0.24mm layer, 2 walls, 8% infill

Strength Issue:And another problem, the drawer doesn't fit and forces it, breaking the box I give up on three different profiles that had just been put in, I was the first to test them and all three are faulty

Show original

@THICOSS

Print Profile

0.24mm layer, 2 walls, 8% infill

Printed on a Bambulab A1... Although the drawer does not fit perfectly in its place, even with the printer properly calibrated and tested, after some filing with drills I managed to save the little model so as not to have to print another drawer... for future users I recommend reducing the drawer width by 2 mm just so you don't have the same printing problem. Other than that the model is perfect!

Show original

@user_1639496408

Print Profile

0.24mm layer, 2 walls, 8% infill

the drawer does not fit in the tray

Show original

@user_2025482855

Print Profile

0.24mm layer, 2 walls, 8% infill

I had warping of walls. I'm sure I caused it, but with some sanding the fit worked. I suggest a bigger finger hole on the drawer, mine won't fit.

@pharcruz

My drawer ended up very tight, it doesn't slide easily :(

Show original

@Smeni

Print Profile

0.24mm layer, 2 walls, 8% infill

Excellently implemented

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.