Calibration cube

This is my simple calibration 20mm cube for XYZ axis. Letters are written on sides.

If you like this cube, you can give me a like or rate this model 👍

Thank you!

Good luck with your calibration!

Models are fanart and are shared as artistic tributes, you may not sell, share, or profit from them.
For commercial use please contact me.

Materials and tools:
- glue gun
- aluminum tape
- led strip: simple 1m white led USB

- soldering iron (optional)
 

RECOMMENDATIONS

- use a textured PEI sheet
- use the print profile, it has quite a few setting changes that help achieve the best results

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20% to 25%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color