Print Profile(1)
Description
Monitor Riser - Desktop Riser
The object consists of:
- Wooden board
- 2 support legs
- 4 wood screws
Specifications:
- The wooden board MUST be 20 cm wide and 1.8 cm thick. The length of the board is optional and can be customized.
In my case, the board is made of laminated spruce wood, sanded with three different grits: 80, 120, and 220. It was then treated with boiled linseed oil.
- The legs are fully 3D printed. The assembly orientation is optional and not strictly defined, though the recommended orientation is provided in the print file.
In the photo, the two heights are 130 mm and 65 mm a combination that can be used to create two equidistant shelves. Alternatively, an 80 mm height is available, which is best used alone to create a single shelf.
- The fixing screws are inserted from underneath.
The screws MUST be wood screws, 3.5 mm in diameter and 16 mm long.
Boost Me (for free)
If you like live a Boost! It' really helpful for me!! Thank you so much!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)