Pokemon-Valentine Pikachu (NO SUPPORT) by SnapPrint3D_SuperCrazyPrints

SnapPrint3D_SuperCrazyPrints

Toys & Games>Characters

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

7.1 h

1 plate

4.7(113)

Color fixed w/ brim, 0.16mm layer, 3 walls, 15% infill

8.9 h

1 plate

4.9(21)

Single Color at 0.16mm layer, 2 walls, 15% infill

48 min

1 plate

4.9(14)

For All Multicolor x1-x28 or big 175cm - 3 plates - 0.16mm layer, 2 walls, 15% infill

58.1 h

3 plates

4.7(11)

Click to see more

Open in Bambu Studio

Boost

557

972

181

3.2 k

1.3 k

Released

Description

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready!
https://www.supercrazyprints.com/

Check out my other models:
https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models

Comment & Rating (181)

@3Dreamworld

Print Profile

Single Color at 0.16mm layer, 2 walls, 15% infill

Very cute model but I recommend printing it slightly larger for better print.

@mysstra

Print Profile

Color fixed w/ brim, 0.16mm layer, 3 walls, 15% infill

chulisimos!!

@imalefty05

Print Profile

0.16mm layer, 2 walls, 15% infill

One small issue on the face/nose. Printed the same on every one i printed. Also a little bit of a color bleeding issue. Overall, awesome though!

@MegJx

Print Profile

Single Color at 0.16mm layer, 2 walls, 15% infill

I’m not sure what happened with this one. new filament type.

@papaw3DPrintFun

Print Profile

0.16mm layer, 2 walls, 15% infill

The print is nice and love the design, but there are definite settings that need to be figured out and adjusted before printing. First thing remember to paint the bottom of the heart or it will have a yellow first layer. secypu will need to do some purge testing and adjust the setting or you will get red and black banding. Again over all great design.

@DMTaino

This right here is the main reason why I personally always look over painted items [from others] before sending it. Also check the flushing, to make sure the bleeding doesn't happen like it did for you. :/

(Edited)

@Michael70

Boosted

had no issues. printed great. I some bleed with black but I didn't flush enough

@Michael70

Boosted

Print Profile

For All Multicolor x1-x28 or big 175cm - 3 plates - 0.16mm layer, 2 walls, 15% infill

this printed great. I had to make a new one for my granddaughter. her old one had a heart tail and I couldn't find it. so I choose this one the only change I made was increased the infill to 25% for more strength. took 48+ hours had some bleed with the black my fault didn't purge enough. still it looks great

@matmal

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

I am satisfied with the result, the only thing I changed was the size, I printed at 125% and also rewrote the filling to gyroid and for better cooling I oriented the model facing the side fan.