Pokemon-Valentine Pikachu (NO SUPPORT) by SnapPrint3D_SuperCrazyPrints

SnapPrint3D_SuperCrazyPrints

Toys & Games>Characters

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

7.1 h

1 plate

4.8(120)

Color fixed w/ brim, 0.16mm layer, 3 walls, 15% infill

8.9 h

1 plate

4.9(31)

Single Color at 0.16mm layer, 2 walls, 15% infill

48 min

1 plate

4.9(20)

(PLA Profile) 0.2mm layer, 2 walls, 5% infill

11.9 h

1 plate

4.6(14)

Open in Bambu Studio

Boost

715

1311

209

3.9 k

1.6 k

Released

Description

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready!
https://www.supercrazyprints.com/

Check out my other models:
https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models

Comment & Rating (209)

@3Dreamworld

Print Profile

Single Color at 0.16mm layer, 2 walls, 15% infill

Very cute model but I recommend printing it slightly larger for better print.

@NotAGuyWithAGun

that’s smart

@FoSsiLzA

Print Profile

0.16mm layer, 2 walls, 15% infill

super cute!

@imalefty05

Print Profile

0.16mm layer, 2 walls, 15% infill

One small issue on the face/nose. Printed the same on every one i printed. Also a little bit of a color bleeding issue. Overall, awesome though!

@Carbonator

Boosted

I love the model. It is scalable. I have printed it with height of 120 mm using PLA matt. The surface finish was great with no apparent layer lines. I increased the number of layers to prevent the bleeding effect. That was not enough. Here are my suggestion for those who wants to print the model: - Print more than one at the same time ... trust me, the material purge is more than the model. - Increase number of layers to 4. - Increase the purge amount between black and yellow colors.... Otherwise, you may end up with a ninja-pikachu ;) - Do NOT activate "Wipe into infill", it is not worth it... I would have loved though a model that can be cut into different segments that can be then glued together. That will save a lot of time and filament.

@mysstra

Print Profile

Color fixed w/ brim, 0.16mm layer, 3 walls, 15% infill

chulisimos!!

@MegJx

Print Profile

Single Color at 0.16mm layer, 2 walls, 15% infill

I’m not sure what happened with this one. new filament type.

@papaw3DPrintFun

Print Profile

0.16mm layer, 2 walls, 15% infill

The print is nice and love the design, but there are definite settings that need to be figured out and adjusted before printing. First thing remember to paint the bottom of the heart or it will have a yellow first layer. secypu will need to do some purge testing and adjust the setting or you will get red and black banding. Again over all great design.

@DMTaino

This right here is the main reason why I personally always look over painted items [from others] before sending it. Also check the flushing, to make sure the bleeding doesn't happen like it did for you. :/

(Edited)