Reinforced Rose Stem Remixed by just.gil

Remixed by

just.gil

Household>Decor

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.9(8)

Open in Bambu Studio

Boost

Released

Description

The problem with this type of model is that it is thin and tall. This means that the toolhead will wiggle it around when printing the out layer, causing quality issues and even print failure.

The changes described below mitigate these issues and provide a far better print quality when printing this model vertically.

Reduced Sparse Infill Density to 15% to avoid solid infill and therefore, improve print quality when the toolhead is printing the top part
Increased width at the base of the stem by introducing a cone shape - this helps with reducing the wiggles introduced by the toolhead.

Comment & Rating (13)

@jeff.massothera

Print Profile

0.16mm layer, 2 walls, 15% infill

Nice.

The designer has replied

@just.gil

thanks for the comment

@timetempest

Hm. even with the changes I'm still getting the wobble at the top.

The designer has replied

@just.gil

What's your inner and outer speeds? And did you make sure to reduced Sparse Infill Density to 15%? or even less. Have a look at the sliced object and make sure there are no infills as it gets taller.

@Ink3D

Print Profile

0.16mm layer, 2 walls, 15% infill

love how thing but yet durable the stem is not to thick very realistic and detailed and super easy to print