Mini Articulated Robot AMS remix
Remixed by
Copyright Claim
Mini Articulated Robot AMS remix
Remixed by
Boost
65
110
11
Print Profile(4)
Single color, 0.16mm layer, 2 walls, 15% infill
Designer
1.7 h
1 plate
![[A1 MINI]AMS, 0.16mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US442d3415f09a04/design/2023-12-14_8f1badfc9dc8a.webp?x-oss-process=image/resize,w_100/format,webp)
[A1 MINI]AMS, 0.16mm layer, 2 walls, 15% infill
Designer
7.1 h
1 plate
![[A1 MINI]Single color, 0.16mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US442d3415f09a04/design/2023-12-14_dea138df556df.webp?x-oss-process=image/resize,w_100/format,webp)
[A1 MINI]Single color, 0.16mm layer, 2 walls, 15% infill
Designer
2 h
1 plate
AMS, 0.16mm layer, 2 walls, 15% infill
Designer
6.7 h
1 plate
Open in Bambu Studio
Boost
65
110
11
1
167
119
Released
Description
Originally made by bqeducacion
remixed for AMS my me.
Comment & Rating (11)
All
Print Profile
AMS, 0.16mm layer, 2 walls, 15% infill
nice model
the provided support was not sufficient to address the area
(Edited)
0
Reply
Print Profile
[A1 MINI]AMS, 0.16mm layer, 2 walls, 15% infill
arms and hands failed on all models, printed with brim and raft. looks to be a support issue and free floating model joints
Support Issue
0
Reply
Print Profile
[A1 MINI]Single color, 0.16mm layer, 2 walls, 15% infill
body printed great but head fell off half way through printing it.
0
Reply
Print Profile
Single color, 0.16mm layer, 2 walls, 15% infill
Was a bit difficult to print as I tried to do it with Silk filament and the head did not stick well while printing. But it worked with tweaking some settings and printing in PLA
Strength Issue
0
Reply
Print Profile
Single color, 0.16mm layer, 2 walls, 15% infill
to much spaghetti on the head
0
Reply
Print Profile
[A1 MINI]AMS, 0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
AMS, 0.16mm layer, 2 walls, 15% infill
Strength Issue
0
Reply
Print Profile
[A1 MINI]Single color, 0.16mm layer, 2 walls, 15% infill
Bed Adhesion Issue
Support Issue:Failed
0
Reply
Print Profile
Single color, 0.16mm layer, 2 walls, 15% infill
Support Issue:Body printed great, head support wasn't nearly enough and spaghettied everywhere
0
Reply
Print Profile
Single color, 0.16mm layer, 2 walls, 15% infill
0
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld