Bambu Scraper Holder

This print holds your scraper on the side of your X1C, P1P, or P1S printer so it's always convenient and ready when you need to scrape anything off your build plate. It requires that you have an AMS system, as the upper portion of the holder slides into the ‘slots’ in the side of the AMS unit in order to be secured to the side of the machine (No glue/tape/screws needed!). I designed it to hold the tool straight up and down both for aesthetics and so that it's easy to grab. It will fit the OG Bambu Scraper as well as my personally prefered “Wera inspired scraper” (see images), and likely others that I do not have and so am not able to test. 

Note that I have the newer version of the AMS unit with 3 channels on each side. The older versions have 5 channels, and I tried to dimension this model (width is 42.2mm) so that it would fit in the narrower channels of the older AMS unit but I do not have one to test it on so I had to base my dimensions on pictures and make some assumptions. If anybody prints this for their old style AMS unit, please confirm whether or not it actually fits. Thanks!