Multiboard Spray Can Hooks - Pegboard Snap-fit

Multiboard Snap-fit hooks for holding aerosol/spray paint cans horizontally. These use 2 pegboard hooks spaced 50mm apart (so spans across 3 MB spots). Spaced to allow for another set to be directly above and still allow for a can to be put in. When stacking you need a bit of flex in the both in order to get a can when putting in. 

I have mine set up with 4 MB pegboard holes between each paired hook (4 unoccupied) and 3 horizontally between pairs of hooks ( you might be able to get away with only 2 but then your cans may be touching eachother). 

Offset on the mounting allows for them to be put over the snaps that are commonly used on joins.