HellRaiser

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x197.78mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Gray
    At layer #13 (1.12mm) swap to Blue
    At layer #14 (1.2mm) swap to Battleship Gray
    At layer #15 (1.28mm) swap to Light Blue
    At layer #17 (1.44mm) swap to White for the rest.

for battleship gray you can use blue gray