Search models, users, collections, and posts
Sharingan Bookmark
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
53 min
1 plate
Open in Bambu Studio
Boost
43
91
7
6
45
21
Released
Description
Bookmark Sharingan/Naruto Thame
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 55.83x200mm in size
You may print at higher layer heights below the Min Depth of 1.5mm
The Max Depth is 3.3mm and the Actual Depth is 3.4mm
Filaments Used:
PLA Generic Black Transmission Distance: 1.7
PLA Generic Matte Dark Red Transmission Distance: 1.9
PLA Generic Grey Transmission Distance: 1
PLA Generic Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #19 (1.6mm) swap to Dark Red
At layer #24 (2mm) swap to Grey
At layer #26 (2.16mm) swap to Ivory White for the rest.
Feel happy to share and comment ;)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (7)