Print Profile(2)
PLA+ 0.4mm nozzle, 0.2mm layer, 5 walls, 15% infill
Designer
27 min
1 plate
![[mini compat]: 0.2mm layer, 5 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US1ba31ba8187f2f/design/2023-12-19_d7fd5708bd693.jpg?x-oss-process=image/resize,w_100/format,webp)
[mini compat]: 0.2mm layer, 5 walls, 15% infill
31 min
1 plate
Boost
81
176
45
4
400
312
Released
Description
Summary
I designed a 3D print bag clip with the little tiny handle , that can help you to release the clip more easily.
I recommend PETG PLA+ or ABS as the filament because it has better strength and toughness
If you like it, please click "like“ it:)
Thank you!
Comment & Rating (45)
All
Print Profile
PLA+ 0.4mm nozzle, 0.2mm layer, 5 walls, 15% infill
nice gift for friends
0
Reply
Boosted
Print Profile
PLA+ 0.4mm nozzle, 0.2mm layer, 5 walls, 15% infill
Good model. If I were to print it again I would use a brim.
0
Reply
Print Profile
[mini compat]: 0.2mm layer, 5 walls, 15% infill
Great 3d i have used Abs, Good suggestions
0
Reply
Print Profile
PLA+ 0.4mm nozzle, 0.2mm layer, 5 walls, 15% infill
seems to work, but doesn't create an air tight seal.
0
Reply
Print Profile
PLA+ 0.4mm nozzle, 0.2mm layer, 5 walls, 15% infill
simple, easy to print
0
Reply
Print Profile
[mini compat]: 0.2mm layer, 5 walls, 15% infill
0
Reply
Print Profile
PLA+ 0.4mm nozzle, 0.2mm layer, 5 walls, 15% infill
(Edited)
0
Reply
Print Profile
PLA+ 0.4mm nozzle, 0.2mm layer, 5 walls, 15% infill
easy and useful
0
Reply
Boosted
Awesome model!!! Use them all the time.
0
Reply
Print Profile
PLA+ 0.4mm nozzle, 0.2mm layer, 5 walls, 15% infill
Very useful
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld