Sadis

cover

20241226_100043.jpg

plate_1.png

2024-12-26_fc7bbc0920bbd.png

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmThe Model is 166.14x189.95mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used:     PLA PolyLite Black Transmission Distance: 0.3     PLA BambuLab Basic Blue Gray Transmission Distance: 3     PLA PolyLite Grey Transmission Distance: 1     PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions:     Start with Black     At layer #4 (0.56mm) swap to Blue Gray     At layer #9 (0.96mm) swap to Grey     At layer #14 (1.36mm) swap to White for the rest.

0.08mm layer, 2 walls, 15% infill

This is my 2nd work, i try to make it the more accurate to the photo, but It&#39;s a very heavy file. Sorry for that.

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

Vampi

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models