Electric toothbrush holder by ale_elli

ale_elli

Tools>Other Tools

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.6 h

1 plate

5.0(28)

0.2mm layer, 2 walls, 15% infill

Designer

52 min

1 plate

5.0(10)

toothbrush+head holder, 0.2mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

4.5(4)

Boost

187

224

Released

Description

15/03/24: a new version for one toothbrush and one spare head has been uploaded!

The original toothbrush holder of my oral-b was always dirty, so I decided to design another one to eliminate this problem.

the toothbrush holder is made in 2 parts, one tray and one base with exagonal texture that is placed inside the tray. In this way, all the residual water and toothpaste flows inside the tray. The two parts are very simple to clean, you need only a tissue and warm water.

I've made a version with one slot and a version with two. Due to the constant contact with liquids, I suggest to realise it in petg, although I made mine in PET and I do not have any sort of problem.

Comment & Rating (47)

@strozaprit

Print Profile

0.2mm layer, 2 walls, 15% infill

very useful and well done but i think that for my oralb io the pin should be 1mm shorter

The designer has replied

@ale_elli

thank you for the suggestion! I use it with an older oralb and I don’t have this problem. I will do a new revision asap!

@Sashaaa

Print Profile

0.2mm layer, 2 walls, 15% infill

Fits toothbrushes well, may end up remixing to add a toothpaste holder, but still does as it should :)

@21josefelix

Print Profile

0.2mm layer, 2 walls, 15% infill

Al igual que la pieza doble que también imprimí, sin problemas de ningún tipo. Imprimiendo las en dos colores gana bastante. Encaja perfecta.

@21josefelix

Print Profile

0.2mm layer, 2 walls, 15% infill

Muy útil la opción de la rejilla para que el agua caiga al recipiente inferior, así se mantendrá más tiempo limpia. Fácil y rápido de imprimir, buena calidad y acabado. en mi caso lo hice en 2 colores.

@emcy_uk1

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice print and toothbrush fits like glove

@livewareproblem

Would it be possible to change the toothbrush_double model so the right hand nub is reduced in size so it can be used to put the head on please? My kids take the head off so it doesn't drip down the toothbrush handle.... I know this would be a remix, but I'm just starting my 3d print journey and have no real idea yet how to adapt existing models! Thanks!

The designer has replied

@ale_elli

I've just updated it!

@livewareproblem

Replying to @ale_elli :

That's brilliant, thanks so much! Printing it now :-D

@alexdeste97

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

great model!

@dgauche

Print Profile

toothbrush+head holder, 0.2mm layer, 2 walls, 15% infill

Printed nice enough, just had to re-scale to fit my toothbrush so that it is removable withtout having to hold it down with the other hand.

@Pozzo

Print Profile

0.2mm layer, 2 walls, 15% infill

les dimensions sont pas parfaites mais me satisfait parfaitement

@dgauche

I printed the version that holds the toothbrush and the head. The pins that holds the toothbrush and the head seems to be too large. There is too much friction and the pin for the toothbrush broke off. While the head fits better, there is so much friction that the tray is lifted off the base when you try to remove it. Overall, I am a bit confused as to why this would be. Printed in X1C with eSun PLA+ and E3D 0.4mm nozzle.