Su-27 (Some form of it probably)

Same as the one on Thingiverse (Some form of SU-27 probably by Yinhe233 - Thingiverse)

My previous Su-27 model, finally got time to share it. The main body has been successfully test-printed on Bambu Lab, wing connectors may require sanding, other connectors may require gluing. Wingtips are fragile, please handle with care and store in a box. Box not yet tested on Bambu, but it seems unlikely this will fail _(:з」∠)_

If the weight is balanced so that the center of gravity is at the large circle near the front of the fuselage, the aircraft should theoretically glide stably, however, the balanced speed is likely to be far higher than the speed an average person can throw it (approx 23g when printed in PLA or PETG, balanced speed approx 20~25m/s, lower weight means lower speed, but it is also harder to balance due to printing limitations)