Simba

Simba Hueforge from the lion king.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x170.82mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA Black Transmission Distance: 0.3
    PLA Brown Transmission Distance: 7.2
    PLA Red Transmission Distance: 6.3
    PLA  Yellow Transmission Distance: 2
    PLA g sand Transmission Distance: 2
    PLA  White Transmission Distance: 5
 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Brown
    At layer #16 (1.36mm) swap to Red
    At layer #18 (1.52mm) swap to Yellow
    At layer #20 (1.68mm) swap to sand
    At layer #21 (1.76mm) swap to White for the rest.