Millenium Falcon Hueforge - Free 3D Print Model

Search models, users, collections, and posts

the_bearded_jedi

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

7.3 h

1 plate

5.0(8)

Open in Bambu Studio

Boost

136

295

Released

Description

Project: milennium falcon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
    PLA PolyTerra Sunrise Orange Transmission Distance: 2
    PLA PolyTerra Arctic Teal Transmission Distance: 0.5
    PLA PolyLite White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Marine Blue
    At layer #14 (1.2mm) swap to Sunrise Orange
    At layer #17 (1.44mm) swap to Arctic Teal
    At layer #19 (1.6mm) swap to White for the rest.