Search models, users, collections, and posts

Rain

dani
Generative 3D Model>Hueforge & Lithophane
IP Report

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.08mm layer, 2 walls, 100% infill
0.08mm layer, 2 walls, 100% infill
Designer
2.2 h
1 plate
5.0(1)
Open in Bambu Studio
Boost
11
8
1
0
27
3
Released 

Description

Project: faccia bagnata.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.2mm and the Actual Depth is 1.3mm

Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Overture Matte Light Gray Transmission Distance: 0.3
PLA Overture White Transmission Distance: 4.4
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Light Gray
At layer #8 (0.72mm) swap to White for the rest.

Comment & Rating (1)

(0/1000)

License

This user content is licensed under a
Creative Commons Public Domain

Related Models

There are no related models yet