Search models, users, collections, and posts
Modular Drawer
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
7.7 h
3 plates
0.2mm layer, 2 walls, 15% infill
Designer
7.7 h
3 plates
Open in Bambu Studio
Boost
14
41
1
0
19
2
Released
Description
Content has been automatically translated.
- Drawers should fit inside the module as is. Scaling the module to 101% and keeping the drawers at 100% (or drawers to 99% and module 100%) does no harm.
- Print speeds can be increased.
- Lower resolution prints faster, but may impact fit between slots and rails. Let me know if you have fit issues at low resolution and I will upload a low resolution high-speed module.
- I recommend printing with 5% infill.
- Supports will halve the print time.
- Modular Drawer 2.0 boasts a sleek design, free of complex printing actions, increasing storage capacity while decreasing print times. Measuring 85 mm x 85 mm x 100 mm, it provides ample space for screws, capacitors, and other common small components.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (1)