HueForge - Nice Ass Donkey - Fitness Motivation

If you appreciate my work, your support would be greatly valued to keep all content free.

Buy me a Coffee …
Ko-Fi … https://ko-fi.com/lagnor69
Pay Pal … https://www.paypal.com/donate/?hosted_button_id=7XBNU8XD2XFAE

---------------------------------------------------------------------------------------------------------

Here you will find the corresponding frames

200 × 140 mm & 140 mm × 200 mm || All-in-One-Frame
https://makerworld.com/en/models/897636#profileId-856000

200 x 200 mm || All-in-One-Frame
https://makerworld.com/en/models/766355#profileId-701658

---------------------------------------------------------------------------------------------------------

Print at 100% infill with a layer height of 0.08mm and a 0.16mm base layer

The model measures 140x200mm
Higher layer heights below the minimum depth of 0.48mm may be used
The maximum depth is 2.2mm and the actual depth is 2.3mm

Filaments Used:
PLA Protopasta Black Transmission Distance: 0.5
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Sunlu Meta White Transmission Distance: 8
This print utilizes three distinct filaments

Swap Instructions:
Begin with Black
At layer #12 (1.04mm) switch to Steel Grey
At layer #18 (1.52mm) switch to White for the remainder