Print Profile(3)

Normal (PLA) - 0.24mm layer, 2 walls, 15% infill
Normal (PLA) - 0.24mm layer, 2 walls, 15% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A149 min
5.0
Front Part Only (TPU) - 0.24mm layer, 2 walls, 15% infill
Front Part Only (TPU) - 0.24mm layer, 2 walls, 15% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A152 min
5.0
0.24mm layer, 2 walls, 15% infill
0.24mm layer, 2 walls, 15% infill
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A153 min

133
218
36
147
153
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Description

NOTE: USE MY (0.24) PROFILE FOR A PERFECT RESULT :)

 

NOTE2: If you print the front part in PLA (it still works), after several uses it will tend to break (precisely because it is PLA)!!

 

TIP: FOR A PERFECT RESULT PRINT THE FRONT PART IN TPU!

 

Upgrade your kitchen space with this innovative 3D-printed towel holder, designed to optimize convenience and style. Inspired by a popular product found on AliExpress, this holder brings practicality and modern aesthetics to your kitchen.

Crafted with precision, this holder boasts a sturdy construction, providing a reliable solution for organizing towels or dishcloths. Its sleek design not only saves space but also adds a touch of contemporary flair to your culinary haven.

Easy to print and assemble with some glue, this towel holder offers a hassle-free solution for keeping your kitchen essentials within reach. Embrace functionality fused with elegance by adding this 3D-printed towel holder to your kitchen decor.

 

Let me know if you want a version of the base with a hole to hang it on the wall, alternatively you can use the existing version, attaching it to the wall with double-sided tape.


License

Comment & Rating (36)

Please fill in your opinion
0/5000

Print Profile
Normal (PLA) - 0.24mm layer, 2 walls, 15% infill
Top must be TPU
The designer has replied
1
Reply
👍🏼
0
Reply
Print Profile
Front Part Only (TPU) - 0.24mm layer, 2 walls, 15% infill
The central hole is a little too big but it works well
The designer has replied
1
Reply
nice 👍🏼
0
Reply
Print Profile
Normal (PLA) - 0.24mm layer, 2 walls, 15% infill
perfect
The designer has replied
1
Reply
🙏
0
Reply
Print Profile
Normal (PLA) - 0.24mm layer, 2 walls, 15% infill
0,24 mm Schicht 2 Wände 15% Füllung
1
Reply
Print Profile
Normal (PLA) - 0.24mm layer, 2 walls, 15% infill
printed and works great! thank you!
1
Reply
Print Profile
Normal (PLA) - 0.24mm layer, 2 walls, 15% infill
Nice and easy!
1
Reply
Print Profile
Front Part Only (TPU) - 0.24mm layer, 2 walls, 15% infill
Perfect Print :)
1
Reply
Print Profile
Normal (PLA) - 0.24mm layer, 2 walls, 15% infill
Very good
The designer has replied
1
Reply
thanks 🙏
0
Reply
Print Profile
Normal (PLA) - 0.24mm layer, 2 walls, 15% infill
Great design, printed cleanly
The designer has replied
1
Reply
thanks
(Edited)
1
Reply
Print Profile
Normal (PLA) - 0.24mm layer, 2 walls, 15% infill
Using TPU Amazon basics, very hard filament to print but the profile is great.
The designer has replied
1
Reply
thanks 🙏
0
Reply

Remixes (0)

There are no remixes yet