Lambert

cover

DSCN0771_d23e0e7c-504c-45a0-8ce9-18db069f6ba6.jpg

plate_1.png;filename*=utf-8''plate_1.webp

plate_2.png;filename*=utf-8''plate_2.webp

plate_1.png

plate_2.png

15% - 20% infill3 walls0 top/bottom for blocks0.24mm layer hightno supports

Honeycomb style cover

plate_1.webp

0.16mm layer height for better overhangsSupport onsupport type defaultPLA

Yellow Star

0.24mm layer2 walls15% infillno supports, bridges should ber fine with PLA

Default cover for tower

plate_2.webp

White

0.24mm layer hight 15% infill0 top/bottom layersI recommend honeycomb infill but you can use any of your choice

All pieces red/white

0.16mm layer height 15% infill2 top/bottom layers but you can try 0 to achieve cool infill pattern2 wallsPLA

Cover on top of tower to prevent star from moving around

Block tower Block tower is Christmas themed party game similar to Jenga, each piece weight is different depending on infill pattern you choose (around 10g on average). You can use any infill type but i recommend honeycomb. Printed in PLA but you can use any material, just be careful with bridges or add supports on default case or you can just print honeycomb type cover. I hope you enjoy playing with it as much as I do.&nbsp;Merry Christmas everyone

Print Profile(5)

Description

Comment & Rating (0)

License

Related Models

Dice Tower Castle Stairs

3 Types of Sanding Blocks

Number sum blocks - stack and count!

Dice Tower - Quidditch Pitch