Cross Light Box
Modeled in Fusion 360
I included two different back plates in the 3mf file. The first has two holes and is for LED lights that are to be soldered in using an on/off switch, a DC power jack, and an AC adapter. That's how I build my light boxes. The switch hole is 8.2mm x 13.5mm. The DC power jack hole is 8mm. The materials I use for this are listed below. The second plate has a single generic hole 8mm x 16mm to be used with whichever lights you prefer. I chose not to include a hanging hole on this model as I've provided a base for it to sit on instead. A third back plate with no holes is provided in the raw files section as an STL, should you want to make your own hole(s) for it.
Please beware of “fast” profiles being added to a lot of my models. The one added to this model is actually slower than my original by about an hour and a half.
Feel free to use this as you see fit. Please don't sell the stl or 3mf files as I would like to keep them open and free. If you would like to sell the actual model, that's fine too, but I would ask that you consider buying me a coffee or something. My cashapp is $dejjen.
LED Lights - 12V: https://amzn.to/3uLFZ8t
On/Off Switch: https://amzn.to/3RlvX5M
DC power jack - female: https://amzn.to/3GDOgOg
AC Adapter - 110/220V to 12V DC: https://amzn.to/3RcgDbw