Red Moon - Luna rossa Hueforge 3 colours

Luna rossa in Hueforge using only 3 colours I used for a wall clock, 

check my others project for the full clock

https://makerworld.com/en/models/890151#profileId-846460

https://makerworld.com/en/models/890180#profileId-846495

https://makerworld.com/en/models/890184#profileId-846501

Full moon 3 colours Hueforge

Yellow Moon 3 colours Hueforge

Orange Moon 3 colours Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

This print uses 3 unique filaments

Swap Instructions:

    Start with Black
    At layer #10 (0.88mm) swap to Red
    At layer #14 (1.2mm) swap to Jade White for the rest.