SCI-FI themed clock light

A Sci-Fi Themed Clock Light!

As the title suggests, this is a clock that lights up with a sci-fi theme. However, it’s not “too” sci-fi - nothing overly extravagant that would make it stand out too much, just the perfect balance of sci-fi and elegant!

Assembly:

1. Wrap the LED strip inside the "Face" part, making sure the cable exits through the designated opening, then cut off the excess LEDs. 
2. Attach the "Face" to the "Top" using 3 M3 20mm screws. 
3. Install the clock component kit. 
4. Attach the "Hook" to the assembly using 4 M3 6mm screws. 
5. Add the clock hands.

6. Use the nails guide to help hook it on the wall!

Hardware Needed:

- 4 x M3 6mm screws
- 3 x M3 20mm screws
- 1 x Clock component kit

- 1 x LED strip

Tips:

- I’ve done extensive testing with various types of PLA, and the size of the clock hands included in the print profile worked best. If they don’t fit (tolerance too loose or tight), you can try resizing them in increments of ±1%. 
- You can use a USB extension cable to increase the length.

- Button head work best for the m.3 screws