Floating time

This is a minimalist and elegant clock with an outer ring suspended by a thread

-Two easily interchangeable tabletop positions using the same base

-A wall-mounting bracket model is available

-With a meter and a half of cord there should be enough, but use more if possible just in case you run short

-You can position the cord as you wish, just be sure to place it in the correct direction; I recommend assembling it without the clock inside, without the base and without the cover, and upside down

-Only requires a color change in the numbers

-Supports are only required on the “center clock” piece on the underside

-It is not necessary to use the nuts and rings included in the kit as the clock cover already has a thread

-There is a print plate with the base, another with the wall mount, another with the main piece and the cover, and another with the outer ring

Feel free to leave any questions or queries in the comments

Happy printing, and enjoy your clock