Stitch Christmas Ornament Bauble - 4 Colours
Print Profile(1)
Description
Membership
If you would like to sell any of my Makerworld prints, a Commercial License is available.
Boost Me (for free)
If you like it. I would appreciate it if you could leave a rating too.
If you print it, rate it. I put in the work. Rating helps me to keep doing that. I recommend using my print profiles for best results. They are setup and ready to print. Just select your filaments and the correct buildplate. I would also recommend reading below in full. Send me a message if you have questions.
If you would like to sell my Hueforges a commercial License is available on Patreon. Link is in my bio.
Important:
- You CANNOT adjust the Z scaling on a Hueforge. It will not come out as intended. You can change the X and Y values to scale the picture up or down though.
- To ensure that the print looks the same as mine you must use the same filaments I did (listed below). If you do not, your results will not be exactly the same as shown.
- What you see in the slicer will not accurately show the final result. Do not worry about this. Hueforge uses color blending, but it does not show in the slicer.
You may see a floating regions error. This can be ignored.
Printing Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Esun PLA+ Black Transmission Distance: 0.1
PLA PolyTerra Army Blue Transmission Distance: 0.3
PLA Oveture Light Blue Transmission Distance: 3.7
PLA Esun PLA+ White Transmission Distance: 7.9
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Army Blue
At layer #12 (1.04mm) swap to Light Blue
At layer #17 (1.44mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)