DJI Osmo Pocket 3 & Pocket 4 Backpack Clip

！！！！！POCKET 4 can also be used ！！！！！

This is a DJI Osmo Pocket 3 backpack clip that can be attached anytime to free your hands

First, I'd like to thank@marco_rc_arena DJI Osmo Pocket 3 Backpack Clip Quick Release by Marco RC Arena - MakerWorld I used his designed mount for 10 days and found it very useful, but also encountered some issues the snap connection wasn't locked and it would fall off when bending over Since this 3D model's license has sharing restrictions, I referenced his model, redrew it, and created a new design

Also, thanks to@TechBug Quick Release Plate with Spring - Fully 3D Printed by TechBug - MakerWorld, this 3D model's license also has sharing restrictions, so I could only use@user_4100640359 's model as a basis for remixing thank you

This device is suitable for:

1. Backpack straps 63mm wide, with an optimal thickness of 6mm, and can accommodate up to 11mm thickness
2. If the backpack strap thickness is less than 6mm, I also designed a 2mm thick accessory that can be added, allowing it to fit thinner straps
3. The two fixing screws can be hand-tightened; if difficult to tighten, the middle groove can be tightened with a coin
4. For printing, I used PETG, which feels more robust; PLA should also work
5. Except for the Pocket 3 cage, which requires supports, none of the other parts do