Sixhorns

cover

Capture.PNG

Capture_(1).png

WhatsApp Image 2025-04-01 at 21.30.30.jpeg

WhatsApp Image 2025-04-01 at 21.30.31 (1).jpeg

WhatsApp Image 2025-04-01 at 21.30.31.jpeg

plate_1.png

2024-12-14_66688430b9b0f.png

Capture1.PNG

Holder V1

This is the second version of my Cigarette Holder. I removed the perpedincular columns for support and added two more magnets on the sides. The final result is better and easier to close than the one before. I printed with eSun PLA-Silk Magic Red-Yellow-Blue.Used 0.4 Nozzle with 0.20mm Standard @BBLX1C profile and the following settings:<ul><li>Quality : <ul><li>Seam position - Back</li></ul></li><li>Strength : <ul><li>Top surface pattern - Archimedean Chords</li><li>Top shell layers - 3</li><li>Top shell thickness - 0</li><li>Bottom surface pattern - Archimedean Chords</li></ul></li><li>Speed :<ul><li>Outer wall - 40</li><li>Normal printing - 5000</li><li>Initial layer travel - 3000</li></ul></li></ul>

Holder V2 Magic Silk

WhatsApp Image 2025-05-10 at 12.40.34.jpeg

Some friend of mine managed to break the collar of the first designs I thought of creating one that has the collar at an angle.Settings:<ul><li>PETG HF as material;</li><li>Top and bottom surface patterns are archimedean cords;</li><li>Infill triangles 10%;</li><li>Top and bottom shells are 1 mm.</li></ul>

Holder V2 Coupe

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

I created a compact cigarette holder composed by the body and the cap with the following specs:<ul><li>Magnetic attachement between the parts with 4.0 x 1.5 (mm) magnets.</li><li>9 x 6mm (roughly 7 mm tolerance) handmade cigarette holding spots. </li><li>1 x holding spot for a small BIC lighter. It has some wiggle to it, but putting a layer of tape will solve the problem</li></ul>This is among my first posts here, so if you have any suggestions or requests please reach out, have fun and remember that smoking is bad for you! :)

Cigarette Holder

ASIA

Print Profile(3)

Description

Comment & Rating (0)

License

Related Models