dark version is raw stl file only
this is for the lighter version
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
JAYO Black Transmission Distance: 0.3
JAYO White Transmission Distance: 21
Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to White for the rest.
this is for the darker version
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Black Transmission Distance: 0.3
White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to White for the rest.