Arcane - Jinx Hueforge

J'ai retiré le cadre bleu autour car cela crée un décalage de l'image sur le coté gauche.

I've removed the blue frame around it because it creates a shift in the image on the left-hand side.

Project: Jinx.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x193.2mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Bambulab Litho Cyan Transmission Distance: 1.7
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA R3D Fluo Green Transmission Distance: 3.8
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Cyan
At layer #11 (0.96mm) swap to Black
At layer #14 (1.2mm) swap to Red
At layer #15 (1.28mm) swap to Jade White
At layer #17 (1.44mm) swap to Red
At layer #19 (1.6mm) swap to Green
At layer #21 (1.76mm) swap to Jade White for the rest.

Comment imprimer plus de 4 couleurs avec un seul AMS : à partir de 42 sec sur la vidéo

How to print more than 4 colours with a single AMS : from 42 sec onwards in the video