The Benchy Cali-Trailer by Martin_au

Martin_au

3D Printer>Test Models

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

23 min

1 plate

4.8(29)

0.2mm layer, 2 walls, 15% infill

30 min

1 plate

4.4(5)

0.2mm layer, 2 walls, 15% infill

23 min

1 plate

5.0(2)

Boost

105

191

346

240

Released

Description

Works with Benchy and the E3D cart - https://www.printables.com/model/320875-e3d-cart-for-towing-the-benchy-and-cali-trailer

A simple little trailer for the benchy that focusses on calibration for unsupported overhangs, bridging, linear advance, and bed adhesion. It also includes a 0.2mm tolerance test if you're up for the challenge.

Bridging - there are 5 bridges in the main body of the trailer of varying lengths.
Overhangs - More challenging than the benchy as they quite thin.
Linear advance - The sharp edges of the trailer are a good spot to identify issues with linear advance.
Bed adhesion - Very small bed area for adhesion.
Tolerance test. The wheels can move separately and have 0.2mm clearance. However, they are very small so consider this a challenge, not a serious calibration.

Comment & Rating (38)

@KatamariJunky

Just bought some Polyterra rainbow filament, and to test it out and make sure the settings are right, I'm working on the full set of benchies. Trailer and boat came out fine. Printing the cart to tow the trailer now.

The designer has replied

@Martin_au

Looks great!

@TheDarkNinja03

Print Profile

0.2mm layer, 2 walls, 15% infill

printed flawlessly!

(Edited)

@CmdrMoto

Print Profile

0.2mm layer, 2 walls, 15% infill

first ever print on my brand new P1S, Bambu brand PLA. all print in place pieces worked smoothly except for the topmost (model: right side) wheel, which required considerable force to break loose.