iPhone 14 pro case

Support the designer:

• Donate Bitcoin here: bc1q9mhh7l53mmlnqqmazdnr6gele0smrzkunclfvj
• Donate Ethereum here: 0x36CA6EEF3700ff18858f195706C5E3A9d6458241

I went through a few iterations to make this case perfect. There's a few features that make it really good:

• Buttons are all have a good click to them. No inconvenient holes, all buttons are covered, including the action button.
• The case has a tight grip on the phone, doesn't slide out easily.
• Camera bump guard is split from the case, so you can print it in different materials like PLA or TPU and different colors.
• Beautiful honeycomb pattern that makes for a nicer finish
• relatively easy to print without bulging or other critical problems

Assembly:

• insert the camera bump guard first in the right direction
• Insert all 3 buttons
• finally insert your phone!

How to print:

• TPU 95: a strong flexible filament is required for the case
• Camera bump guard can be print in TPU or PLA.
• Use supports on tight overhangs on the case like the buttons and speaker and port bridges.
• I recommend 15% infill, for better clickiness of buttons.
• If you want the cool effect to highlight the honeycomb pattern in a different colour, you'll need to add a stop at layer 2 and 3. This means you'll start with TPU, change to the other colour at layer 2 and revert to TPU at layer 3.
• Print 3 volume rocker buttons and 1 power button

Update log:

• 2023-12-09: first version uploaded