This design is a remix of the "Mic Boom Arm Phone/Camera Holder Clamp" from KeyboardPrinter:
https://www.thingiverse.com/thing:5232897

The original is a fully printed phone stand for microphone arm. I like the strong hold on the phone, the compatibility with any phone and the degree of freedom (rotation) given by the design so i decided to adapt it to camera stands.

In this design you gave 3 option to fix the holder to a camera stand:

• You can print the model "Mount_Rod_Solid_Camera_Stand.STL" to replace the file "Mount_Rod_Solid" in the original, the threaded hole is adapted to standard camera holder screw.
• You can print the "Adaptator bolt.STL" file, it has a threaded hole adapted to a camera stand and a protuberant screw to adapt into the original holder. It is a quick and easy way to do but is not extremely strong.
• You can print the "Adaptator M3 screws.STL" and fix it to the holder with 3 M3X15mm screws. It also has a threaded hole compatible with camera stand. It will provide a strong connection but is more tiresome to change from a microphone arm to a camera stand.

All the original files are included in the "Original.ZIP" file. I encourage you to go to the original page for more explanations.