P1S Screen/XTOUCH Spacer for IGLU Enclosures
Print Profile(1)
Description
With the iglu finally arriving to customers, some adaptations have to be done for certain things.
Heres my poop chute spacer as the first adaptation i have needed to do: https://makerworld.com/en/models/866983#profileId-818289
Now for the second one. The spacers i have seen, and the one i was using do not work with opening the iglu enclosure as it gets caught. Heres a spacer that will prevent that from happening! This spacer is flush with the edges of the back of the screen, minimalistic, fast print time (30 mins). Tight and snug fit to make sure no movement is going to happen and will provide a strong and firm hold!
If you have other purposes of feeding cords through the printer other than the xtouch screen, this will work with or without the iglu!
Printed in ASA-CF, do not recommend PLA (do what you want), printer gets hot at times and will wreck the spacer if its in PLA.
.2 profile with support dont touch any settings all good to go. Supports do come off good, also tested without support and still worked but found the support gives a stronger and nicer finish!
Boost Me (for free)
Im new, i highly appreciate all feedback :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)