Bulbasaur

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Back Story

This is the last of the 4 original Pokémon I know most growing up watching with my kids. This completes the set I started. I did not think ahead and made the prints more uniform in size for those that want to display them together as a set. I am in the process of altering them and make them all 2x3 uniformity. The bookmarks will be as well all same sizes. The Pikachu bookmark is a different size than the rest currently. All will be available to be downloaded on my Patreon Page.

Thanks to all that boosted. This helps with the cost of testing different material combinations. Many prints are tried to be true. I have a collection of 18 prints total of Eevee and the 8 Evolution in the works. They will all fit together to form a poster. I have printed the bookmarks, but not the portraits. Printing takes time and work beckons. Have to wait a little longer. Patreon members will have early access.

Bookmark Bulbasaur Sunshine Pool
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

The Model is 112mmx200mm in size. 
 

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (180max for A1 mini and 250max for P1/X1, this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with HueForge, just use a lighter to whisk them away.

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Default White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
    At height depth (0.8mm) swap to Green
    At height depth (1.2mm) swap to Yellow
    At height depth (1.6mm) swap to White for the rest.

Eevee Collection is Here

18 Total Prints

9 Portraits

9 Bookmarks

One each of Eevee and the 8 Evolutions: Espeon, Flareon, Glaceon, Jolteon, Leafeon, Sylveon, Vaporean, and Umbreon.

Together will form a poster. 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections