你这个拿耗材出来不好拿把。

Thanks for uploading Google Translation of the Decryption: "You can print the i-sealing box by yourself using A1. The size of the box is a circle with a diameter of 180, which is exactly the printing size. What should be noted here is that there should be a close support inside. After hand-drawing the support, it may exceed the printing size. You can only change it a little bit or You can scale the printing ratio (I haven’t tried it myself). For the lid of the box, you can directly buy a circular acrylic plate with a diameter of 176 on Taobao and choose a thickness of 3mm. It costs 5 yuan a piece and is still cheap because it is difficult to put in ordinary trays due to the size. Go in, what I provide here is Bing’s material tray, but I didn’t draw the shaft. If you don’t buy their consumables, you have to rewind it yourself. There are two holes in the sealing box. One hole is for the filament, and the other hole is where I plan to use it later. Send hot air in to save the trouble of changing the dryer. The opening for the consumables can be equipped with an air pipe interface, but it can be used without it, but it may jam the consumables. Hygrometer. The embedded hygrometer bought on Taobao costs 5 yuan each. It does not pursue accuracy and is cost-effective."