Right Angle Clock

Right Angle Clock

A right-angle clock, crafted using Bambu Lab's official MH-011 clock kit, functions as a versatile accessory. It serves equally well as a pen holder, a planter, or a stylish wall-mounted timepiece, enhancing both desk and wall decor.

For optimal use as a pen holder, we suggest placing it within an IKEA pen holder or a container of similar dimensions, as it might prove somewhat large when used independently.

This right-angle clock, designed with Bambu Lab's official MH-011 clock kit, can be used as a pen holder, flower pot, etc. It can also be used as a wall right angle clock, making it a great wall and desktop decoration.
It is recommended to directly put it into an IKEA pen holder or other appropriately sized item, as it may be larger when used directly as a pen holder.

Assembly Instructions:

1. Print the 1-3 disk models from the sliced files.

2. Secure the printed decorative ring to the clock casing using adhesive, using the locating pin as a guide.

3. Attach the clock hands.

4. Affix 4 x 2mm circular magnets (Bambu Lab's official accessory CA001) to both the square body and the clock casing, ensuring the magnetic polarities attract. Secure the casing to the square body via magnetic attraction.

Installation steps:

1. Print 1-3 disk models of sliced files.
2. Fix the printed decorative ring onto the watch case with glue, using the positioning column as a reference during fixation.
3. Install the pointer.
4. Install 4 × 2mm circular magnets (official accessory CA001 from Bambu Lab) on the square barrel and case respectively, ensuring that the magnetic poles are placed in a mutually attractive manner, and then attach the case to the square barrel.

For wall mounting, the sliced files offer two size options: 10cm diameter (discs 1, 3) and 15cm diameter (discs 4-6). Simply attach the hands, decorative ring, and case. We recommend using Bambu Lab's official 3M double-sided tape (NB005) for secure wall adhesion.

When used as a wall right angle clock, there are two sizes to choose from in the slicing file: 10cm diameter (discs 1 and 3) and 15cm diameter (discs 4 to 6). Simply install the hands, decorative ring, and case. It is recommended to use official 3M double-sided tape (NB005) from Bambu Lab to stick it to the wall.