cover

BT0SZ7KXFB}56G$[~FD20CA.jpg

Snipaste_2024-12-08_15-31-45.png

9 in one plate

plate_1.png

2024-12-08_06636ec275f29.jpg

Snipaste_2024-12-08_15-31-34.png

0.2mm Do Not Add Support brim is fine if the attachment to plate sucks

Just 1 Ring    0.2mm layer, 2 walls, 8% infill

Snipaste_2024-12-10_04-32-41.png

$[KJ2}~]KQ8A0HT%~(3OB2Q_tmb.jpg

9K6V[$U4%8@F6U`A0]0S`HS_tmb.jpg

the back is soild you can use tape pr glue stick inside of the bag! (damn thats smart, I didn&#39;t think of that when I was making it) anywhy it gaves a big blank area can put tapes on, and I recommand smooth plate to print it

filled Base, can be stick to the bag [v2]

Angelol

Immagine WhatsApp 2024-12-12 ore 15.59.55_8b9fb806.jpg

This is a x4 profile with arachne and high h. layer fo for save time, 1 layer speed slowed for better adhesion (good for tec materials).&nbsp;3 walls for more resistance.

X4  ARACHNE + 1Layer SLOWED - 0.28mm layer,3 walls,5% infill

CWood

1.png

2.png

PXL_20250219_032119254.MP.jpg

PXL_20250219_032154406.jpg

This remix adds a ring around the upper surface to help pull the bag tight once the suction begins, creating a flat surface to better assist the pump. It also maintains <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@AYZSSM">@AYZSSM</a>&#39;s flat bottom surface modification so you may optionally tape it to your vacuum bag — a brilliant solution to prevent this ring from sliding around before you begin.

Added a vacuum suction seal against the bag

Giotrope

vacuum bag valve ring.jpg

Since my vacuum pump had a smaller outer diameter than the inner diameter of the original ring, I made this resized version to help the adhesion during the vacuuming process. It works, I printed a singole one of them alone on the print plate twice, then a dozen of them all together on one single plate. All of them all came out well-looking and they do their job.&nbsp;X/Y size: 89% Z size: same as original model

89% size (⌀ 40mm, th 5mm) - 0.2mm layer, 2 walls, 8% infill

25 in one plate

FixoLab

IMG_4116.jpeg

IMG_4115.jpeg

X1C - 25x Vacuum Ring - Full Bed

plate_2.png

plate_3.png

Kuhn Family

Screenshot 2025-09-25 at 2.06.35 PM.png

Screenshot 2025-09-25 at 2.07.28 PM.png

Screenshot 2025-09-25 at 2.08.00 PM.png

This profile that prints the vacuum rings vertically. This allows you to print large batches of 50, 100, and 175. This profile has the backing.

Vertical printing of vacum ring with Base [v2] 50, 100, 175

plate_4.png

plate_5.png

Screenshot 2025-09-25 at 2.18.55 PM.png

Screenshot 2025-09-25 at 2.18.30 PM.png

Based on the original design, this profile has flipped the rings vertically in order to allow for a large volume of prints at one time. You can print 25, 50, 75, 100, and 175. This profile can support 125% sport speed to decrease print time without issues.

25-50-75-100-175 Vacum Rings stacked vertical

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

help vacuum bag more vacuum&nbsp;have trouble ring gos around of the bag?  just stick [v2] to the bag 👍<ul><li>note please Appropriate vacuum level, and keep it on eye, vacuum tooooo hard will bend the spool</li></ul>

vacuum ring for filament vacuum bag

Snipaste_2024-12-14_19-18-21.png

Snipaste_2024-12-14_19-18-45.png

)O8{_(}M4]MS6XZ{T47~8J4_tmb.jpg

vacuum ring for vacuum bag (automatic Alignment)

ASIA

Print Profile(8)

Description

Comment & Rating (2770)

License

Remixes (1)
(Created before license restrict)

Related Models