Inner Glide Brewing Unit Siemens EQ6 400
Print Profile(0)
Description
Today I needed two new glides for the brewing unit of my Siemens EQ 6 400 coffee machine.
The two old ones were broken.
I made and installed two new ones, then started a test and lo and behold, it works again.
A new brewing unit would have cost about 100 euros.
However, you have to completely disassemble the brewing unit to get to these glides.
There are about 6 Torx screws that you have to loosen and you will get to these two glides.
The model was printed with 50% infill density and 30% infill/wall overlap.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)