Circular table clock

This clock does not require glue to assemble.

All the pieces are interlocking and deliberately hard to assemble to avoid the use of hot glue. 
I used an old kit I had at home but it's been designed for the Bambu clock kit.

ASSEMBLING INSTRUCTION:

Start by assembling all small black joints on every numbered disks.

Two different raising joints must be inserted on disk number 3 (one right and one left), while two different lowering joints must be inserted on disk number 9 (one right and one left).
All the joints of the other discs follow the direction of those of numbers 3 and 9.

Then patiently connect one another to form the circle (Starting from number 9, the other disks “GO UP” to number 3 and then back “DOWN” to number 9).

Then mount the clock mechanism on its joint and proceed with the assembly on number 12.

At last fix the base at number 6.