Multi Tier Planter - No Supports Needed by Zurlingo-3D

Zurlingo-3D

Household>Garden

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Full Scale 0.2mm layer, 3 walls, 0% infill

Designer

11.7 h

1 plate

4.6(9)

Cacti Castle, Cool Plate, 0.2mm layer, 3 walls, 0% infill

Designer

11.7 h

1 plate

3.0(3)

80% Scale For A1 Mini, 0.2mm layer, 3 walls, 0% infill

Designer

7.9 h

1 plate

2.0(1)

Open in Bambu Studio

Boost

123

235

226

104

Released

Description

A nine pot multi tier planter, perfect for a windowsill or table!

All pots drain into the center section and collect in the bottom.
Excess water can be left in the bottom to add humidity or can be drained by tipping it slightly.
The pots are 6cm wide - Perfect for 5.5cm Cactus and Succulents

Print Settings:

Layer Height 0.2-0.3mm.
No support or infill required!
5 top/bottom layers
3 perimeters

Designed and tested to print in place really easily. Make sure your bed is level before printing - If it isn't then you can run into issues many hours into printing.

It takes roughly 18-24 hours to print, depending on layer height.

Thanks for looking and please upload pictures of your creations with this!

Comment & Rating (19)

@bubbablack590

not thrilled that I have to change how this is displayed so your name isn't shown. you couldn't put it on the bottom so the sides could be clean?

The designer has replied

@Zurlingo3D

It's completely symmetrical so you can just face the name at the back? - It also clearly shows the name in the pictures, so I'm not sure why you printed it if it's a problem?

@user_1843431695

Print Profile

Full Scale 0.2mm layer, 3 walls, 0% infill

printed this for my daughter who loves cactus as a house warming present, she loves it. printed great

The designer has replied

@Zurlingo3D

Very clean print! Great job! I hope your daughter enjoys Cactus shopping ;P Thanks for printing :)

@escollins01

Print Profile

Full Scale 0.2mm layer, 3 walls, 0% infill

scaled to 85% and it printed nicely

@maker626

Print Profile

Cacti Castle, Cool Plate, 0.2mm layer, 3 walls, 0% infill

printed great

@vnutschi

Print Profile

Full Scale 0.2mm layer, 3 walls, 0% infill

(Edited)

@Starangel_1313

Print Profile

Full Scale 0.2mm layer, 3 walls, 0% infill

@SuntreeCustoms

Print Profile

Full Scale 0.2mm layer, 3 walls, 0% infill

Tried several times but could not get it to print properly based the top layers in the base.

The designer has replied

@Zurlingo3D

What do you mean? - This prints great and all but 2 reviews are 5 stars. I'm not sure what you're doing wrong. A level bed is essential though, so I'd suggest tramming your bed as something is most likely out on the printer itself.

@Samarensis

i guess it must be petg to stand against water?

The designer has replied

@Zurlingo3D

If using indoors then PLA is fine. If you're putting it outside, I'd suggest PETG for the UV properties. They will both have similar properties in regards to water but I have only ever printed these in PLA and all of them have been water tight. At least at the base, where it is important. Thanks! :)

@bubbablack590

Print Profile

Cacti Castle, Cool Plate, 0.2mm layer, 3 walls, 0% infill

Other Issues

@bubbablack590

Print Profile

80% Scale For A1 Mini, 0.2mm layer, 3 walls, 0% infill

Other Issues:doesnt print well and dont like that the designer puts thier name on the side where it cant be a center piece. please move your autograph to the underside

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.