Magsafe charger stand for iPhone - standby mode by thmsdrz

thmsdrz

Tools>Gadgets

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

2.2 h

1 plate

4.8(29)

0.2mm layer, 3 walls, 100% infill

3.6 h

1 plate

5.0(13)

0.2mm layer, 3 walls, 65% infill

5.3 h

1 plate

5.0(1)

A1 mini, 0.2mm layer, 3 walls, 15% infill

2.2 h

1 plate

Boost

119

184

439

300

Released

Description

Simple and elegant stand made for the Apple Magsafe charger. Easy to print in place.

Idea

Inspired by the Twelve South Forté stand used by Apple to showcase the new StandBy mode for iOS. I wanted to create the most simple, easy to use and print stand for the magsafe charger and the iPhone.

Two versions

Because I love to have the choice, I created two versions :

All in one, single piece, ready to be printed in place with no supports and no brim.
Split version where the base and the head are separate and held together by a screw, allowing you to choose two materials etc. Also easy to print, with recommended brim only for head and screw.

Printing instructions

I recommend printing at 0.2mm, as is. It was specially designed to work without supports.

For the split version, I recommend adding a brim for stability for the head and the screw.

Want some more ?

I also designed a clamp version available here.

Changelog

2023-10-06 : Added a hole in the middle of the head for easy removal of the charger
2023-09-14 : V1 uploaded

Buy me a coffee

If you like my work, you can buy me a coffee. Appreciated !

Comment & Rating (49)

@Pontos

nice looking model, but I have problem with the circle not being printed very nice its the second try, and failed, you can see how I placed it on the build plate, for as much cooling as it can be, but its not the problem, it looks like its worse now I have placed it so the fan blows at the circle any ideas ?

@Pontos

0,16 layer height 4 wall loops 100 infill (for stability and weight)

@EwwBunnie

Print Profile

0.2mm layer, 3 walls, 15% infill

looks good

@midego

Nice model, thanks!

@corey.borders

Print Profile

0.2mm layer, 3 walls, 15% infill

@wirelessbread

Print Profile

0.2mm layer, 3 walls, 65% infill

very sturdy at 65% infill

The designer has replied

@midego

Thank you for the feedback :)

@AllesWirdGold

Print Profile

0.2mm layer, 3 walls, 15% infill

super

@kmobnz

Print Profile

0.2mm layer, 3 walls, 15% infill

printed perfectly with pla

@laerchhansi

Print Profile

0.2mm layer, 3 walls, 15% infill

Sieht sehr schön aus und funktioniert auch sehr gut. Habe mittlerweile schon zwei :)

@user_3672443628

at first it was great, but after a day the MagSafe just falls out... maybe because the inductive charging gets warm? at the beginning it was super hard to get in.

@agebtBaltic

Print Profile

0.2mm layer, 3 walls, 15% infill

perfect print on a1