Cord / Cable Organizer (Large version) by Singh

Singh

Tools>Gadgets

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Bambu Handy 0.2mm layer, 3 walls, 15% infill

Designer

33 min

1 plate

4.9(330)

0.2mm layer, 4 walls, 25% infill

41 min

1 plate

4.8(38)

with wall mount holes, 0.28mm layer, 3 walls, 30% infill

37 min

1 plate

4.8(9)

0.2mm layer, 3 walls, 15% infill

40 min

1 plate

4.9(8)

Open in Bambu Studio

Boost

1278

3214

509

364

4.3 k

2.9 k

Released

Description

This is the version for organizing large cables.

This clip is particularly suitable for power cables or cables that are too long.

Caution, remove the pieces when the print bed is cold.

If you are looking for a clip for small or medium sized cables, Click here or on the link.

https://makerworld.com/en/models/836148#profileId-781441

Boost Me (for free)

cable management clip

winding wire

Comment & Rating (509)

@user_71567434

Boosted

Print Profile

Bambu Handy 0.2mm layer, 3 walls, 15% infill

Added a sleeve for my laptop charger and increased size 50% and I can’t tell you how happy this makes me.

The designer has replied

@user_2486456120

I'm happy for you 😁

Show original

@Spiny6521

Could you post that design? I could really use something like that for my laptop charger!

@user_71567434

Boosted

Replying to @Spiny6521 :

I haven’t done any of that yet, but I’ll try to figure it out soon.

@GreyWolfe111

Boosted

Looking at my stack of unorganized chaos of various extra larger video and power cords, happen to see the new larger version of my favorite design for a cord keeper. The original printed absolutely gorgeous. These are starting to print as I type this and expect the same stellar results.

(Edited)

The designer has replied

@user_2486456120

👍 Let me know how you find the enhanced version. Then, if any modifications are needed, we can make them

Show original

@GreyWolfe111

Boosted

Replying to @user_2486456120 :

Due to the added thickness of the clasp, I have noticed they are more difficult to open and close then the smaller design. Which might be good for keeping tamed the larger cords. It might loosen up and become easier as they are used. But for those with less hand strength it could be an issue. Just for added info: Printed in PETG with 4 walls and 25% infill Flaming to soften and then lightly straightening the top of the bends in the clasp just a hair, helps to loosen up the tension a bit and makes it easier to open and close. So opening up the ends of the "C" a bit, might be the key.

(Edited)

@user_2486456120

Indeed, it might be difficult to open for those lacking hand strength, you could also change materials, for instance, I printed with PLA from various brands, using Bambu Lab PLA the opening and closing are very smooth while using Anycubic or Creality PLA it becomes slightly difficult, I modified part C, it is visible in the slicer

Show original

@arnoutdc

Print Profile

Bambu Handy 0.2mm layer, 3 walls, 15% infill

Exactly what I needed! Thanks!

The designer has replied

@user_2486456120

😁👍

@user_822701079

Print Profile

Bambu Handy 0.2mm layer, 3 walls, 15% infill

Prints very nicely even on ludicrous.

The designer has replied

@user_2486456120

👍

@toffe

Boosted

Print Profile

Bambu Handy 0.2mm layer, 3 walls, 15% infill

printed one 200% and a bunch normal sized. these are my new goto clips! they just work :) the 200% required a bit sanding to be possible to open easily. I wish I had one just a bit larger but not as thick as this one scaled up 😅

The designer has replied

@user_2486456120

Thank you for the feedback, I will try to create a model with even larger cables 😁

Show original

@Aagardcaleb

Boosted

Print Profile

Bambu Handy 0.2mm layer, 3 walls, 15% infill

these are great and easy, I've probably printed 200 atp 😂 i use them all the time and as an electronics engineer they are ridiculously useful

The designer has replied

@user_2486456120

I'm happy for you😁

Show original

@Maximvs

Boosted

Print Profile

Bambu Handy 0.2mm layer, 3 walls, 15% infill

Strong snap clothes. Great for holding cables had no issues with print profile.

The designer has replied

@user_2486456120

👍

@RevHazlett

Print Profile

Bambu Handy 0.2mm layer, 3 walls, 15% infill

This is a great model for cable management (stuck on the TV with a little VHB tape), and while the profile is pretty much stock it uses gyroid infill which is a welcome change from seeing grid on so many things. Printed well, works well. Thanks!

The designer has replied

@user_2486456120

Thank you for the feedback 😁

Show original

@MF.Print

Print Profile

Bambu Handy 0.2mm layer, 3 walls, 15% infill

prints quick 🤷‍♂️

The designer has replied

@user_2486456120

good

@user_4111473750

Boosted

Easy to print and useful This version for large cables is appreciated

The designer has replied

Show original

@user_2486456120

Thank you 😁

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

243

Print Profile(4)

Description

Comment & Rating (509)

License

Related Models

Cable organizer CLIP

A simple cable reel

Cable Organizer / Large, medium, small.

cable tool, cable holder