Heavy-Duty Dog Poop Bag Holder by Bleepbloop

Bleepbloop

Household>Pets

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.9(79)

PETG 0.2mm layer, 2 walls, 15% infill

1.6 h

1 plate

5.0(6)

Boost

107

175

449

594

Released

Description

I strap this right to my dog's harness or leash and other styles would eventually break or get lost since he is very high energy. Crafted with durability and functionality in mind, this ensures a hassle-free and sturdy experience during your dog-walking adventures. If you appreciate the design and find it beneficial, consider leaving a tip in my bio. Thanks!

Comment & Rating (98)

@volkswaggn

I love this design!! thank you! Just a heads up to anyone printing with the PETG profile specifically, I wanted to call out that if any moderate twisting force is applied to the lid while attached to the main body (like by someone who thought this model unscrewed like many others do instead of pulling off), the body seems to separate right at the slope. I’m using some purple esun PETG and it printed beautifully, but 4 out of the 6 I printed all failed in the same spot, and I’m just being very careful with the other 2. The model would likely benefit from some enforcement/additional infill or a higher wall count and even possibly a more gradual slope in that area just to help strengthen and improve the surface area where the 2 are attached. I am going to try a reprint with another roll of PETG and some PLA and see how that turns out.

The designer has replied

@Bleepbloop

Sorry to hear you are having issues. I found the 0.20mm Strength profile does a good job (6 walls). Good luck!

@ei8htohms

I love this design, but agree that this seems like a good reason for the lid not to have vertical channels that give the impression it should be twisted or unscrewed. Lateral ribbing would help give the right cues to the user.

@criss24x7

Print Profile

0.2mm layer, 2 walls, 15% infill

I really like this minimalistic design. thank you.

The designer has replied

@Bleepbloop

nice color choice. is it the dark blue matte? thanks for the feedback!

(Edited)

@criss24x7

nope. it‘s the Bambu Lab PLA-CF Jeansblue.

(Edited)

@Bleepbloop

Replying to @criss24x7 :

nice! I need to get a roll

@SteveY

Print Profile

PETG 0.2mm layer, 2 walls, 15% infill

Very good design, prints easily. (translucent petg here)

@Bleepbloop

Looks great! Thanks for the kind words

@leclairaaron

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

I’ve been using this for a few weeks now and it works perfectly with all of the different types of poo bags that I have. honestly this is probably the best poo bag holder I’ve ever used!